Leibniz Universität Hannover Faculty Faculty of Mechanical Engineering
Deutsch Contact Deutsch
Institute of Dynamics and Vibration Research
 
Institute of Dynamics and Vibration Research Research Research Groups Dynamics of Rotating Machinery
Publications

Publications of the Research Group »Dynamics of Rotating Machinery«

Journal (reviewed)

  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Analysis of Contacts in Friction Damped Turbine Blades using Dimensionless Numbers,  J. Eng. Gas Turbines Power. Dec 2019, 141(12): 121023 (7 pages)
    DOI: 10.1115/1.4044481
  • Amer, M., Paehr, M.; Panning-von Scheidt, L.; Seume, J. R.; Schmied, J. (2022): Determining the Influence of Casing Vibrational Behaviour On Rotordynamics.,  ASME. J. Eng. Gas Turbines Power 144(5): 051012
    DOI: 10.1115/1.4053123
  • Bonhage, M.; Adler, J.T.; Kolhoff, C.; Hentschel, O.P.; Schlesier, K.-D.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Transient amplitude amplification of mistuned structures: An experimental validation,  J. Sound and Vibration 436 (2018) 236–252
    DOI: 10.1016/j.jsv.2018.07.031
  • Bonhage, M.; Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Transient Amplitude Amplification of Mistuned Blisks,  J. Eng. Gas Turbines Power 137, 112502-1
    DOI: 10.1115/1.4030278
  • Brinkmann, K.; Hoffmann, T.; Panning-von Scheidt, L.; Stüer, H. (2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampers,  International Journal of Turbomachinery, Propulsion and Power, 2023, 8(4), 38.
    DOI: 10.3390/ijtpp8040038
  • Carassale, L.; Denoël, V.; Martel, C.; Panning-von Scheidt, L. (2021): Key Features of the Transient Amplification of Mistuned Systems,  ASME. J. Eng. Gas Turbines Power. March 2021; 143(3): 031016.
    DOI: 10.1115/1.4049501
  • Förster, A.; Krack, M. (2016): An efficient method for approximating resonance curves of weakly-damped nonlinear mechanical systems,  Computers & Structures, 169. Jg., S. 81-90
    DOI: 10.1016/j.compstruc.2016.03.003
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random Excitation,  Journal of Engineering for Gas Turbines and Power
    DOI: 10.1115/1.4048407
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random Excitation,  J. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
    DOI: 10.1115/1.4040740
  • Hartung, A.; Hackenberg, H.-P.; Krack, M.; Gross, J.; Heinze, T.; Panning-von Scheidt, L. (2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgL,  J. Eng. Gas Turbines Power. 2018; 141(1):011004-011004-8, Paper No: GTP-18-1279
    DOI: 10.1115/1.4041160
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Global detection of detached periodic solution branches of friction-damped mechanical systems.,  Nonlinear Dynamics. 99(2).
    DOI: 10.1007/s11071-019-05425-4
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2017): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed,  J. Eng. Gas Turbines Power 139(6), 062503
    DOI: 10.1115/1.4035286
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics Prediction,  J. Eng. Gas Turbines Power. 2018; 141(4):042503-042503-11
    DOI: 10.1115/1.4040843
  • Hentschel, O. P.; Bonhage. M.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey, P.-A. (2016): Analysis of an experimental setup for structural damping identification,  Journal of Theoretical and Applied Mechanics 54, 1, 27-39
    DOI: 10.15632/jtam-pl.54.1.27
  • Hentschel, O. P.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M. (2015): Introduction and Evaluation of a Damping Determination Method Based on the Short-Term Fourier Transform and Resampling (STFR),  Journal of Theoretical and Applied Mechanics 53, 2, 395-407
    DOI: 10.15632/jtam-pl.53.2.395
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2021): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study.,  ASME. J. Eng. Gas Turbines Power. September 2021; 143(9): 091028.
    DOI: https://doi.org/10.1115/1.4051172
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Measured and Simulated Forced Response of a Rotating Turbine Disk with Asymmetric and Cylindrical Underplatform Dampers,  Journal of Engineering for Gas Turbines and Power
    DOI: 10.1115/1.4045337
  • Hüls, M.; Panning-von Scheidt, L., Wallaschek, J. (2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction Damper,  J. Eng. Gas Turbines Power. 2018; 141(4):041022-041022-10
    DOI: 10.1115/1.4040732
  • Hüls, M.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Combined Airfoil and Snubber Design Optimization of Turbine Blades With Respect to Friction Damping,  J. Turbomach. 2018; 140(8):081007-081007-11, TURBO-18-1048
    DOI: 10.1115/1.4040679
  • Jäger, F.; Panning-von Scheidt, L.; Wallaschek, J. (2024): Experimental and Numerical Analysis of Rotational Speed Influence on the Nonlinear Dynamics of Turbine Blades with Shroud Coupling,  International Journal of Gas Turbine, Propulsion and Power Systems, 2024, Volume 15, Issue 2, Pages 17-26
    DOI: https://doi.org/10.38036/jgpp.15.2_17
  • Jahn, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Comparison of different harmonic balance based methodologies for computation of nonlinear modes of non-conservative mechanical systems,  Mech. Syst. Signal Process. 127 (2019), 159-171
    DOI: 10.1016/j.ymssp.2019.03.005
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A High-Order Harmonic Balance Method for Systems with Distinct States,  Journal of Sound and Vibration 332 (21): 5476-5488
    DOI: 10.1016/j.jsv.2013.04.048
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A Method for Nonlinear Modal Analysis and Synthesis: Application to Harmonically Forced and Self-Excited Mechanical Systems,  Journal of Sound and Vibration 332 (25): 6798–6814
    DOI: 10.1016/j.jsv.2013.08.009
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): On the Computation of the Slow Dynamics of Nonlinear Modes of Mechanical Systems,  Mechanical Systems and Signal Processing 42 (1-2), 71-87
    DOI: 10.1016/j.ymssp.2013.08.031
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.: (2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks,  J. Eng. Gas Turbines Power 139(4), 042501
    DOI: 10.1115/1.4034650
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.: Hartung, A. (2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks with Shroud Contact,  J. Eng. Gas Turbines Power 135 (10), 102502–102509
    DOI: 10.1115/1.4025002
  • Krack, M.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Reliability Optimization of Friction-Damped Systems Using Nonlinear Modes,  Journal of Sound and Vibration 333, 2699–2712
    DOI: 10.1016/j.jsv.2014.02.008
  • Laborenz, J.; Krack M., Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey, P. (2012): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement Results,  J. Eng. Gas Turbines Power 134, 042504
    DOI: 10.1115/1.4004734
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C.; Masserey, P.-A. (2010): Eddy Current Damping - A Concept Study For Steam Turbine Blading,  J. Eng. Gas Turbines Power 132(5), 052505-1-052505-7
    DOI: 10.1115/1.3205032
  • Maroldt, N.; Schwerdt, L.; Berger, R.; Panning-von Scheidt, L.; Rolfes, R.; Wallaschek, J.; Seume, J. R. (2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and Aerocoupling,  ASME. J. Eng. Gas Turbines Power 144(11): 111017
    DOI: https://doi.org/10.1115/1.4055368
  • Paehr, M.; Panning-von Scheidt, L. (2024): Application of Interface Reduction Methods to Rotordynamic Casing Models,  ASME. J. Eng. Gas Turbines Power
    DOI: https://doi.org/10.1115/1.4066606
  • Panning, L.; Sextro, W.; Popp, K. (2003): Spatial Dynamics of Tuned and Mistuned Bladed Disks with Cylindrical and Wedge Shaped Friction Dampers,  Int J. of Rotating Machinery (9)3, 219-228
    DOI: 10.1155/S1023621X03000198
  • Pohle, L.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): High Order Sensitivity Analysis of a Mistuned Blisk Including Intentional Mistuning,  J. of Theoretical and Applied Mechanics 55, 1, 353-368
    DOI: 10.15632/jtam-pl.55.1.353
  • Popp, K.; Panning, L.; Sextro, W. (2003): Vibration Damping by Friction Forces - Theory and Applications,  J. Vibration and Control (9)3-4, 419-448
    DOI: 10.1177/107754603030780
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System Model,  J. Eng. Gas Turbines Power
    DOI: 10.1115/1.4049357
  • Schwerdt, L.; Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk Sectors,  J. Eng. Gas Turbines Power. May 2019, 141(5): 052502 (7 pages)
    DOI: 10.1115/1.4041071
  • Siewert, C.; Panning, L.; Wallaschek, J.; Richter, C. (2010): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces,  J. Eng. Gas Turbines Power 132(8), 082501-1-082501-9
    DOI: 10.1115/1.4000266
  • Wallaschek, J.; Willeke, S.; Panning-von Scheidt, L. (2019): Discussion of “Dynamic Modeling and Projection-Based Reduction Methods for Bladed Disks with Nonlinear Frictional and Intermittent Contact Interfaces” (Mitra, M., Epureanu, B. I., 2018, ASME Appl. Mech. Rev., 71(5), p. 050803).,  ASME. Appl. Mech. Rev. September 2019; 71(5): 055502.
    DOI: 10.1115/1.4044933
  • Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks under Rotation,  Technische Mechanik, 37, 2-5, (2017), S. 314 – 325
    DOI: https://doi.org/10.24352/UB.OVGU-2017-107
  • Willeke, S.; Schwerdt, L.; Panning-von Scheidt, L., Wallaschek, J. (2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic Damping,  J. Eng. Gas Turbines Power. 2018;140(12):121010-121010-10
    DOI: 10.1115/1.4040898

Conferences (reviewed)

  • Amer, M.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.; Schmied, J. (2021): Determining the influence of casing vibrational behaviour on rotordynamics,  Paper ID-021, SIRM 14th International Conference on Dynamics of Rotating Machines, Gdańsk, Poland, 17th –19th February, 2021
  • Aschenbruck, J.; Meinzer, C. E.; Pohle, L.; Panning-von Scheidt, L.; Seume, J. (2013): Regeneration-Induced Forced Response in Axial Turbines,  Paper No. GT2013-95431, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-95431
  • Bonhage, M.; Panning-von Scheidt, L.; Wallaschek, J.; Richter, C. (2012): Transient Resonance Passage with Respect to Friction,  Paper No. GT2012-68986, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68986
  • Brinkmann, K.; Hoffmann, T.; Panning-von Scheidt, L.; Stüer, H. (2023): Transient resonance passage of a mistuned bladed disk with and without underplatform dampers,  Proceedings of 15th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC15), Budapest, April 24-28, 2023.
  • Brinkmann, K.; Panning‐von Scheidt, L.; Stüer, H. (2023): Geometrically Mistuned Blisks: Strain Gauge and Tip Timing Vibration Measurements of Rotating Blades with and Without Underplatform Dampers,  Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Carassale, L.; Denoël, V.; Martel, C.; Panning-von Scheidt, L. (2020): Identification of the essential features of the transient amplification of mistuned systems.,  Paper GT2020-15693, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
    DOI: https://doi.org/10.1115/GT2020-15693
  • Denkena, B.; Deichmüller, M. ; Kröger, M.; Panning-von Scheidt, L. ; Carstensen, C. ; Kilian, S. (2007): Modeling and Simulation of the Process Machine Interaction During Tool Grinding Processes,  Proceedings of the 10th CIRP International Workshop on Modeling of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007
  • Förster, A.; Panning-von Scheidt, L. (2022): Interface Reduction in an Equivalent Linearization Algorithm for Nonlinearly Coupled Systems Under Random Excitation,  ASME 2022 Turbo Expo
    DOI: 10.1115/GT2022-78367
  • Förster, A.; Panning-von Scheidt, L. (2021): Calculation of Nonlinear Systems under Narrow Band Excitation Using Equivalent Linearization and Path Continuation,  ASME paper GT2021-58437, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
    DOI: 10.1115/GT2021-58437
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Approximate Solution of the Fokker–Planck Equation for a Multidegree of Freedom Frictionally Damped Bladed Disk Under Random,  ASME paper GT2018-75755, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek,J. (2020): Equivalent Linearization of Bladed Disk Assemblies with Friction Nonlinearities Under Random Excitation,  ASME 2020 Turbo Expo
    DOI: 10.1115/GT2020-14264
  • Götting, F.; Sextro, W.; Panning, L.; Popp, K. (2004): Systematic Mistuning of Bladed Disk Assemblies With Friction Contacts,  Paper No. GT2004-53310, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
    DOI: 10.1115/GT2004-53310
  • Götting, F.; Sextro, W.; Panning, L.; Popp, K. (2003): Schwingungsverhalten von verstimmten Beschaufelungen mit Reibelementen,  SIRM 2003 - Schwingungen in rotierenden Maschinen 6, Darmstadt, February 26-28, 2003
  • Hartung, A.; Hackenberg, H.-P.; Krack, M.; Gross, J.; Heinze, T.; Panning-von Scheidt, L. (2018): Rig and Engine Validation of the Nonlinear Forced Response Analysis Performed by the Tool OrAgL,  ASME paper GT2018-75186, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Nodal diameter-dependent modal damping method for nonlinear blade dynamics prediction considering variable rotational speed,  Proceedings of ASME Turbo Expo 2017, 26-30 June, Charlotte, NC, USA
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2016): A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed,  Paper No. GT2016-56375, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
    DOI: 10.1115/GT2016-56375
  • Heinze, T.; Panning-von Scheidt, L.; Wallaschek, J.; Hartung, A. (2018): Rotational Speed-Dependent Contact Formulation for Nonlinear Blade Dynamics Prediction,  ASME paper GT2018-75290, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Hentschel, O.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey P.-A. (2014): Influential Parameters on Structural Damping Values of Turbine Blades,  Paper No. GT2014-25656, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-25656
  • Herzog, A.; Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Comparison of two Widely-Used Frequency-Time Domain Contact Models for the Vibration Simulation of Shrouded Turbine Blades,  Paper No. GT2014-26226, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-26226
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Single Nodal Diameter Excitation of Turbine Blades: Experimental and Theoretical Study,  Paper GT2020-14282, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
    DOI: https://doi.org/10.1115/GT2020-14282
    ISBN: 978-0-7918-8423-2
  • Hoffmann, T.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Modelling friction characteristics in turbine blade vibrations using a Fourier series expansion of a real friction hysteresis. ,  X International Conference on Structural Dynamics, EURODYN 2017, Rome, Italy, Procedia Engineering 199 (2017) 669–674, 2017
    DOI: 10.1016/j.proeng.2017.09.586
  • Hohl, A.; Kriegesmann, B.; Wallaschek, J.; Panning-von Scheidt, L. (2011): The Influence of Blade Properties on the Forced Response of Mistuned Bladed Disks,  Paper No. GT2011-46826, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
    DOI: 10.1115/GT2011-46826
  • Hohl, A.; Siewert, C.; Panning, L., Kayser, A. (2008): Nonlinear Vibration Analysis of Gas Turbine Bladings with Shroud Coupling,  Paper No. GT2008-50787, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
    DOI: 10.1115/GT2008-50787
  • Hohl, A.; Siewert, C.; Panning, L.; Wallaschek, J. (2009): A Substructure Based Reduced Order Model for Mistuned Bladed Disks,  Paper No. DETC2009-87459, Proceedings of ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, USA, August 30-September 2, 2009
    DOI: 10.1115/DETC2009-87459
  • Hüls, M.; Panning-von Scheidt, L., Wallaschek, J. (2018): Influence of Geometric Design Parameters onto Vibratory Response and HCF Safety for Turbine Blades with Friction Damper,  ASME paper GT2018-75363, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Jäger, F.; Kaptan, F.; Panning-von Scheidt, L.; Wallaschek, J. (2021): Development of a Multi-Shaker-Control to Investigate the Influence of the Interblade Phase Angle on Frictionally Damped Turbine Blades,  ASME paper GT2021-59272, Int. Gas Turbine & Aeroeng. Congress and Exh., virtual
    DOI: https://doi.org/10.1115/GT2021-59272
  • Jäger, F.; Panning-von Scheidt, L.; Wallaschek, J. (2023): Experimental and Numerical Analysis of Rotational Speed Influence on the Nonlinear Dynamics of Turbine Blades with Shroud Coupling,  Proceedings of the International Gas Turbine Congress 2023, November 26 - Dezember 1, Kyoto, Japan, 2023
  • Kaptan, F.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Numerical and Experimental Study of Shrouded Blade Dynamics Considering Variable Operating Points,  ASME paper GT2018-76692, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Krack, M.; Herzog, A.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2012): Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to Microslip,  Paper No. DETC/CIE2012-70184, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
    DOI: 10.1115/DETC2012-70184
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2016): On the Interaction of Multiple Traveling Wave Modes in the Flutter Vibrations of Friction-Damped Tuned Bladed Disks,  Paper No. GT2016-56126, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, Seoul, South Korea, June 13–17, 2016
    DOI: 10.1115/GT2016-56126
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2013): Reduced Order Modeling Based on Complex Nonlinear Modal Analysis and its Application to Bladed Disks With Shroud Contact,  Paper No. GT2013-94560, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-94560
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2012): Robust Design of Friction Interfaces of Bladed Disks with Respect to Parameter Uncertainties,  Paper No. GT2012-68578, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68578
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J.; Siewert, C.; Hartung, A. (2013): Analysis and Robust Design of Friction Joints for Vibration Reduction in Bladed Disks,  SIRM 2013- 10th International Conference on Vibrations in Rotating Machines, Berlin, February 25 - 27, 2013
  • Laborenz, J.; Krack; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.: Masserey, P.-A.: (2011): Eddy Current Damper for Turbine Blading: Electromagnetic Finite Element Analysis and Measurement Results,  Paper No. GT2011-45242, ASME Turbo Expo 2011: Turbomachinery Technical Conference and Exposition, Vancouver, Canada, June 6-10, 2011
    DOI: 10.1115/GT2011-45242
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C.; Masserey, P.-A. (2009): Eddy Current Damping: A Concept Study for Steam Turbine Blading,  Paper No. GT2009-59593, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
    DOI: 10.1115/GT2009-59593
  • Maroldt, N.; Schwerdt, L.; Berger, R.; Panning-von Scheidt, L.; Rolfes, R.; Wallaschek, J.; Seume, J. R. (2022): Reduced Order Modeling of Forced Response in a Multistage Compressor Under Mistuning and Aerocoupling,  ASME paper GT2022-81090, Int. Gas Turbine & Aeroeng. Congress and Exh., Rotterdam, 2022, pp. 1-12
    DOI: http://dx.doi.org/10.1115/GT2022-81090
  • Paehr, M.; Panning-von Scheidt, L. (2024): Application of Interface Reduction Methods to Rotordynamic Casing Models.,  Paper GT2024-121370, Proceedings of the ASME 2024 Turbo Expo Conference (2024); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, June 2024.
  • Panning, L.; Sextro, W.; Popp, K. (2002): Optimization of the Contact Geometry between Turbine Blades and Underplatform Dampers with Respect to Friction Damping,  Paper No. GT-2002-30429, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
    DOI: 10.1115/GT2002-30429
  • Panning, L.; Sextro, W.; Popp, K. (2000): Optimization of Interblade Friction Damper Design,  Paper No. 2000-GT-0541, ASME Turbo Expo 2000: Turbomachinery Technical Conference and Exposition, Munich, Germany, May 8-11, 2000
    DOI: 10.1115/2000-GT-0541
  • Panning, L.; Sextro, W.; Popp, K.; Götting, F.; Kayser, A.; Wolter, I. (2004): Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application,  Paper No. GT2004-53316, ASME Turbo Expo 2004: Turbomachinery Technical Conference and Exposition, Vienna, Austria, June 14-17, 2004
    DOI: 10.1115/GT2004-53316
  • Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J., Aschenbruck, J.; Seume, J.R. (2014): Dynamic Behavior of a Mistuned Air Turbine: Comparison Between Simulations and Measurements,  Paper No. GT2014-26025, ASME Turbo Expo 2014: Turbomachinery Technical Conference and Exposition, Düsseldorf, Germany, June 16-20, 2014
    DOI: 10.1115/GT2014-26025
  • Reul, A.; Schwerdt, L.; Rinderknecht, S. (2016): Fast Multidisciplinary Design Optimization in the Development of Mechatronic Systems,  Proceedings of ASME 2016 International Mechanical Engineering Congress and Exposition. November 11, Phoenix, USA
    DOI: 10.1115/IMECE2016-65599
  • Schlesier, K.-D.; Panning-von Scheidt, L., Wallaschek, J. (2018): Investigations on Transient Amplitude Amplification by Applying Intentional Mistuning,  ASME paper GT2018-75514, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018
  • Schlesier, K.-D.; Panning‐von Scheidt, L.; Ehehalt, U.; Levin Rojas, R. (2023): Investigations on Laterally Coupled Rotor‐Blade‐Vibrations,  In: Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Schurzig, D.; Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2012): Modeling Contact Dynamics of Vanes with Adjustable Upstream Flow Angles,  Paper No. GT2012-68185, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68185
  • Schwarzendahl, S. M.; Szwedowicz. J.; Neubauer, M.; Panning-von Scheidt, L.; Wallaschek, J. (2012): On Blade Damping Technology Using Passive Piezo Dampers,  Paper No. GT2012-68600, ASME Turbo Expo 2012: Turbomachinery Technical Conference and Exposition, Copenhagen, Denmark, June 11-15, 2012
    DOI: 10.1115/GT2012-68600
  • Schwerdt, L.; Hauptmann, T.; Kunin, A.; Seume, J.R.; Wallaschek, J.; Wriggers, P.; Panning-von Scheidt, L.; Löhnert, S. (2017): Aerodynamical and Structural Analysis of Operationally Used Turbine Blades,  In: Procedia CIRP 59, 77–82
    DOI: 10.1016/j.procir.2016.09.023
  • Schwerdt, L.; Maroldt, N.; Panning-von Scheidt, L.; Wallaschek, J.; Seume, J. (2022): An Improved Reduced Order Model for Bladed Disks Including Multistage Aeroelastic and Structural Coupling,  Proceedings of Global Power and Propulsion Society GPPS Chania22, 18th–20th September, 2022.
    DOI: 10.33737/gpps22-tc-106
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2020): A Model Order Reduction Method for Bladed Disks with Large Geometric Mistuning using a Partially Reduced Intermediate System Model,  Paper GT2020-14199, Proceedings of the ASME 2020 Turbo Expo Conference (2020); ASME Turbo Expo: Turbomachinery Technical Conference & Exhibition, London, UK, September 2020
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J.; Berger, R.; Rolfes, R; Keller, C.; Seume, J. (2017): Influence of Blade Repairs on Compressor Blisk Vibration considering Aerodynamic Damping and Mistuning,  Proceedings of Shanghai 2017 Global Power and Propulsion Forum, GPPS-2017-0142
  • Schwerdt, L.; Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2018): Reduced-Order Modeling of Bladed Disks Considering Small Mistuning the Disk Sectors,  Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, 2018
    DOI: 10.1115/GT2018-76610
  • Schwerdt. L.; Berger, R.; Panning-von Scheidt, L.; Gebhardt, C.G.; Wallaschek, J.; Rolfes, R. (2019): Probabilistic Study of Blend Repairs on an Axial Compressor Blisk using the Subset of Nominal Modes Method,  Proc. IGTC Int. Gas Turbine Congress, Tokyo, 2019
  • Sextro, W.; Panning, L.; Götting, F.; Popp, K. (2002): Fast Calculation of the Statistics of the Forced Response of Mistuned Bladed Disk Assemblies with Friction Contacts,  Paper No. GT-2002-30427, ASME Turbo Expo 2002: Turbomachinery Technical Conference and Exposition, Amsterdam, The Netherlands, June 3-6, 2002
    DOI: 10.1115/GT2002-30427
  • Siewert, C.; Panning, L.; Gerber, C.; Masserey, P.-A. (2008): Numerical and Experimental Damping Prediction of a Nonlinearly Coupled Low Pressure Steam Turbine Blading,  Paper No. GT2008-51073, ASME Turbo Expo 2008: Turbomachinery Technical Conference and Exposition, Berlin, Germany, June 9-13, 2008
    DOI: 10.1115/GT2008-51073
  • Siewert, C.; Panning, L.; Schmidt-Fellner, A.; Kayser, A. (2006): The Estimation of the Contact Stiffness for Directly and Indirectly Coupled Turbine Blading,  Paper No. GT2006-90473, ASME Turbo Expo 2006: Turbomachinery Technical Conference and Exposition, Barcelona, Spain, May 8-11, 2006
    DOI: 10.1115/GT2006-90473
  • Siewert, C.; Panning, L.; Wallaschek, J. (2009): Nonlinear Multiharmonic Vibrations of Coupled Turbine Bladings,  SIRM 2009 - 8th International Conference on Vibrations in Rotating Machines, Vienna, February 23 - 25, 2009
  • Siewert, C.; Panning, L.; Wallaschek, J.; Richter, C. (2009): Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact Forces,  Paper No. GT2009-59201, ASME Turbo Expo 2009: Turbomachinery Technical Conference and Exposition, Orlando, Florida, June 8-12, 2009
    DOI: 10.1115/GT2009-59201
  • Strehlau, U.; Langheinrich, D.; Beirow, B.; Xiao, Y.; Panning‐von Scheidt, L. (2023): Geometrically Mistuned Blisks: Assessment of Geometric Uncertainties and Finite‐Element Mesh Morphing,  Rinderknecht, S.; Schüßler, B.; Schwarz, S. (Hrsg.) (2023): Proceedings of SIRM 2023 - The 15th European Conference on Rotordynamics. Darmstadt, Germany, 22.-24.02.2023
    DOI: 10.26083/tuprints-00024057
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Dynamics of Bladed Disks with Frictional Coupling and Alternate Mistuning Pattern,  Paper No. IMECE2014-38263, Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition (IMECE), November 14-20, 2014, Montreal, Canada
    DOI: 10.1115/IMECE2014-38263
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A. (2012): Alternate Mistuning of Turbine Bladings Coupled by Underplatform Dampers,  Paper No. IDETC/CIE2012-70863, Proceedings of ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, Chicago, USA, August 12-15, 2012
    DOI: 10.1115/DETC2012-70863
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J.; Kayser, A.; Walz, G. (2013): Investigation of Alternate Mistuned Turbine Blades Non-Linear Coupled by Underplatform Dampers,  Paper No. GT2013-95681, ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition, San Antonio, Texas, June 3-6, 2013
    DOI: 10.1115/GT2013-95681
  • Willeke, S.; Keller, C.; Panning-von Scheidt, L.; Seume, J.R.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Considering Aerodynamic Coupling and Mode Family Interaction,  12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (ETC12), Stockholm, April 3-7, 2017
  • Willeke, S.; Panning-von Scheidt, L.; Wallaschek, J. (2017): Reduced Order Modeling of Mistuned Bladed Disks Under Rotation,  12th International Conference on Vibrations in Rotating Machines (SIRM 2017), Graz, Austria, February 15-17, 2017
  • Willeke, S.; Schwerdt, L.; Panning-von Scheidt, L., Wallaschek, J. (2018): Intentional Response Reduction by Harmonic Mistuning of Bladed Disks with Aerodynamic Damping,  ASME paper GT2018-76601, Int. Gas Turbine & Aeroeng. Congress and Exh., Oslo, 2018

Books

  • Panning, L. (2005): Auslegung von Reibelementen zur Schwingungsdämpfung von Turbinenschaufeln,  Diss., Düsseldorf: VDI-Fortschrittberichte Reihe 11, Nr. 328
  • Popp, K.; Schiehlen, W. (unter Mitwirkung von Kröger, M.; Panning, L.) (2010): Ground Vehicle Dynamics,  Springer-Verlag Berlin
    DOI: 10.1007/978-3-540-68553-1
    ISBN: 978-3-540-24038-9

Contribution to Books

  • Kleyman, G.; Jahn, M.; Tatzko, S.; Panning-von Scheidt, L. (2023): A Combined Numerical-Experimental Approach for the Damping Evaluation of Non-Linear Dissipative Vibration Systems,  Eberhard, P. (ed.).: Lecture Notes in Applied and Computational Mechanics, Volume 102: Calm, Smooth and Smart. Novel Approaches for Influencing Vibrations by Means of Deliberately Introduced Dissipation, pp. 285-303
    DOI: 10.1007/978-3-031-36143-2

Vortrag

  • Hoffmann, T. (2018): Convenient Choice of Friction Test Parameters for Simulation of Turbine Blade Contacts,  Blade Mechanics Seminar, Winterthur, CH

Conferences

  • A. Bode, A.; Panning, L.; Schröder, J.J. (1998): Growth and Collapse of Vapor Bubbles in Subcooled Boiling near the Region of Alternating Boiling Modes, Kyongju, Korea,  11th Int. Heat Transfer Conf. 2, Kyongju, Korea, August 23-28, 1998
  • Amer, M.; Schmied, S.; Paehr, M.; Panning-von Scheidt, L.; Seume, J.R. (2022): Optimal Sensor Placement and Model Updating of Axial Compressor Casing Components,  Proceedings of IMAC-XL (40th) 2022: A Conference and Exposition on Structural Dynamics, Feb. 7-10, Orlando, Florida
  • Bartelt, M.; Freund, O.; Seume, J. R.; Panning-von Scheidt, L.; Röhle, I.; Buske, C. (2012): Aeroakustik & Aeroelastik der Strömungsmaschinen - Eine Vorlesung als Reaktion auf aktuelle Herausforderungen in der Turbomaschinenentwicklung,  DAGA 2012, 38. Jahrestagung für Akustik, Darmstadt, March 19-22, 2012
  • Bonhage, M.; Herzog, A.; Panning-von Scheidt, L.; Wallaschek, J. (2013): Resonance Passage of Structures with Friction Contacts,  Paper ID 345-993, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
  • Bonhage, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): Resonance Passage of Cyclic Symmetric Structures,  International Conference on Vibration Problems (ICOVP-2013), Lissabon, Portugal, September 9-12, 2013
  • Flöter, F.; Pohle, L.; Denkena, B.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Mistuning of Blisks During Milling Process - Manufacturing and Repair,  Deutsche Gesellschaft für Luft- und Raumfahrt (Hg.): 64. Deutscher Luft- und Raumfahrtkongress (DLRK), Rostock, Germany, September 22-24, 2015
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2020): Forced Response of Nonlinear Systems Under Combined Harmonic and Random Excitation,  Kerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
    DOI: 10.1007/978-3-030-12391-8_7
  • Förster, A.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Forced Response of Nonlinear Systems Under Combined Harmonic and Random Excitation,  Kerschen, Brake et al. (Hg.) 2020 – Nonlinear Structures and Systems
    DOI: 10.1007/978-3-030-12391-8_7
  • Genzo, A.; Sextro, W.; Panning, L. (2007): Schwingungsverhalten elastischer Körper mit nichtlinearen Kopplungen in ausgedehnten Reibkontakten,  VDI-Tagung Nichtlineare Schwingungen - Reibung und Kontaktmechanik (VDI-Berichte 2022), Kassel, Germany, November 13-14, 2007
  • Genzo, A.; Sextro, W.; Panning, L.: (2006): Dynamic Behaviour of Elastic Bodies Coupled by Extended Friction Contacts,  Proc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgiuem, September 18-20, 2006
  • Henke, M.; Guendogdu, Y.; Seume, J.; Siewert, C.; Panning, L.; Wallaschek, J. (2008): Unidirectional Coupled Aerodynamic and Structural Mechanic Analysis of a Turbine Blading,  Proc. of IMechE 9th Int. Conf. on Vibrations in Rotating Machinery, Exeter, S. 171-184
  • Hentschel, O.; Panning-von Scheidt, L.; Wallaschek, J.; Denk, M.; Masserey P.-A. (2014): Introduction and Evaluation of an Experimental Setup for Material Damping Determination,  Proc. Of ISROMAC-15, The 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 24 - 28, 2014
  • Hoffmann T., Jahn M., Scheidt L.P., Wallaschek J. (2020): Modal Excitation of Circular Rotating Structures Using an Innovative Electromagnetic Device,  Mains M., Dilworth B. (eds) Topics in Modal Analysis & Testing, Volume 8. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham
    DOI: 10.1007/978-3-030-12684-1_15
    ISBN: 978-3-030-12684-1
  • Hohl, A.; Neubauer, M.; Panning, L.; Wallaschek, J. (2009): Modelling of Shunted Piezoceramic Actuators with Substructure Techniques and Application to a Bladed Disk Model,  IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Singapore, July 14-17, 2009
  • Hohl, A.; Neubauer, M.; Schwarzendahl, S. M.; Panning, L.; Wallaschek, J. (2009): Active and Semiactive Vibration Damping of Turbine Blades with Piezoceramics,  Proc. SPIE Smart Structures/NDE 2009, San Diego, March 8-12, 2009
  • Hohl, A.; Panning, L. (2011): Analysis of the Frequency Response of Mistuned Multi-Stage Bladed Disks,  Paper No. 11-4, ICEAF II, 2nd International Conference of Engineering against Fracture, Mykonos, Greece, June 22-24, 2011
  • Hohl, A.; Panning, L.; Wallaschek, J. (2010): Analysis of the Influence of Blade Pattern Characteristics on the Forced Response of Mistuned Blisks with a Cyclic CMS-Based Substructure Model,  Paper No. ESDA2010-25294, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems and Design Analysis (ESDA 2010), Istanbul, Turkey, July 12-14, 2010
    DOI: 10.1115/ESDA2010-25294
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2013): A Method of Modal Analysis and Synthesis for Mechanical Systems with Piecewise-Smooth Nonlinearities,  Paper 682, 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM), Montreal, Canada, July 23-26, 2013
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): A Framework for the Computational Dynamic Analysis of Coupled Structures Using Nonlinear Modes,  In: Kerschen G. (eds) Nonlinear Dynamics, Volume 2: Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, Orlando, Florida, USA, February 3-5, 2014
    DOI: 10.1007/978-3-319-04522-1_5
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Modal analysis of nonlinear dissipative systems: Application to vibration damping with shape memory materials,  Proceedings of the 15th Conference on Nonlinear Vibrations, Localization and Energy Transfer, Istanbul, Turkey, July 2-4, 2014
  • Krack, M.; Panning-von Scheidt, L.; Wallaschek, J. (2014): Vibration analysis of structures with contact interfaces using nonlinear modes,  Proceedings of the 11th World Congress on Computational Mechanics, July 20-25, Barcelona, Spain, 2014
  • Laborenz, J.; Panning, L.; Wallaschek, J.; Denk, M.; Masserey, P.-A. (2012): Experimental Analysis of an Eddy Current Damping Devce Applied to a Rotating Integrally Bladed Disk,  Proc. Of ISROMAC-14 The 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27 - March 2, 2012
  • Marhenke, N.; Wallaschek, J.; Panning-von Scheidt, L.; Tatzko, S.; Hartung, A.; Schwarz, S. (2020): Numerical investigations of the energy transfer between modes due to multi-resonances of a nonlinear friction-damped model,  International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 7-9, 2020
  • Oettinger, M.; Prohaska, P.; Schwerdt, L.; Panning-von Scheidt, L.; Herbst, F.; Seume, J. (2019): Potenzialstudie eines Verbunds aus entkoppelt betriebenen Aeroderivaten,  Beitrag in: Hurtado, A.; Beckmann, M.; (Hrsg.): Kraftwerkstechnik 2019, SAXONIA
    ISBN: 3934409938
  • Panning, L.; Kröger, M.; Wallaschek, J. (2007): Schwingungsdämpfung durch Reibung: Theorie, Experiment, Anwendungen,  VDI-Tagung Schwingungsdämpfung (VDI-Berichte 2003), Wiesloch, October 16-17, 2007
  • Panning, L.; Sextro, W.; Popp, K. (2002): Spatial Dynamics of Tuned and Mistuned Bladed Disk Assemblies with Cylindrical and Wedge Shaped Friction Dampers,  Paper No. DD-028, Proc. of ISROMAC-9, The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, USA, February 10-14, 2002
  • Panning, L.; Sextro, W.; Popp, K. (2001): Schwingungsanalyse verstimmter Schaufelkränzemit Reibelementen, Wien,  Tagungsband Schwingungen in rotierenden Maschinen V. Wien, February 26-28, 2001
  • Pohle, L.; Panning-von Scheidt, L.; Wallaschek, J. (2012): Reduced Order Model of Mistuned Bladed Disks Using the Krylov-Subspace Combined with the Craig-Bampton Reduction Technique,  Paper No. 18187, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
    DOI: 10.5151/meceng-wccm2012-18187
  • Romberg, O.; Tausche, M.; Pereira, C.; Panning, L. (2007): Passive Damping of Spacecraft Sandwich Panels,  10th European Conference on Spacecraft Structures, Materials & Mechanical Testing, Berlin, September 10-13, 2007
  • Schedlinski, C.; Genzo, A.; Läer, B.; Panning, L. (2006): Modeling of Assembled Combustion Engine Parts under Consideration of Micro Slip Effects in the Connection Flanges,  Proc. of the 12th International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September 18-20, 2006
  • Schurzig, D.; Panning-von Scheidt, L.; Hartung, A.; Wallaschek, J. (2012): Nonlinear harmonic analysis of structures containing joints with impacts and friction,  Paper No. 18336, Proceedings of the 10th World Congress on Computational Mechanics, Sao Paulo, Brazil, July 8-13, 2012
    DOI: 10.5151/meceng-wccm2012-18336
  • Schwerdt, L.; Panning-von Scheidt, L.; Wallaschek, J. (2019): A Priori Interface Reduction for Substructuring of Multistage Bladed Disks,  Dynamic Substructures, Volume 4, Proceedings of the 37th IMAC, a Conference and Exposition on Structural Dynamics 2019, Springer, 13–21
    ISBN: 3030121844
  • Siewert, C.; Krack, M.; Panning, L.; Wallaschek, J. (2008): The Nonlinear Analysis of the Multiharmonic Forced Response of Coupled Turbine Blading,  Proc. Of ISROMAC-12, The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, Hawaii, February 27th - March 2, 2012
  • Tamai, R.; Tanaka, R.; Sato, Y.; Kusterer, K.; Lin, G.; Kemper, M.; Panning-von Scheidt, L. (2013): Vibration Analysis of Shrouded Turbine Blades for a 30 MW Gas Turbine,  Paper No. TBTS2013-2014, ASME 2013 Turbine Blade Tip Technical Symposium and Course Week (TBTS2013), Hamburg, Germany, September 30–October 3, 2013
    DOI: 10.1115/TBTS2013-2014
  • Tatzko, S.; Panning-von Scheidt, L.; Wallaschek, J. (2015): Forced response of turbine bladings with alternating mistuning and friction damper coupling,  EUROMECH Colloquium 573 Coupling and Nonlinear interactions in Rotating Machinery, Lyon, France, August 25-26, 2015

Berichte

  • Hoffmann, T.; Panning-von Scheidt, L. (2019): Frequenz- und Dämpfungsvorhersage für freistehende Turbinenschaufeln mit Unterplattform-Dämpfer,  Leibniz Universität Hannover, Förderkennzeichen BMWi 03ET7041L
    DOI: 10.2314/KXP:1689220627

Journal

  • Bonhage, M.; Hentschel; O. P.; Panning-v. Scheidt, L.; Wallaschek, J. (2015): Transient amplification of maximum vibration amplitudes,  Proc. Appl. Math. Mech., 15: 47-48
    DOI: 10.1002/pamm.201510014
  • Denkena, B.; Neuber, C.-C. ; Kallage, F. ; Panning, L. (2006): Aufbau und Regelung einer Magnetführung für Werkzeugmaschinen,  Proc. Appl. Math. Mech., 6: 801–802
    DOI: 10.1002/pamm.200610380
  • Hentschel, O. P.; Bonhage, M.; Panning‐von Scheidt, L.; Wallaschek, J. (2015): Evaluation of a Finite Element Approach for Damping Determination,  Proc. Appl. Math. Mech., 15: 201–202
    DOI: 10.1002/pamm.201510091
  • Herzog, A.; Panning-von Scheidt, L. (2010): Nonlinear Vibrations with Friction: A Multiharmonic Approach,  Proc. Appl. Math. Mech., 10: 245–246
    DOI: 10.1002/pamm.201010115
  • Hohl, A.; Panning, L.; Siewert, C.; Bürge, A. (2007): The Vibrational Behaviour of Bladed Disks with Multiple Coupling Devices,  Proc. Appl. Math. Mech., 7: 4040037–4040038
    DOI: 10.1002/pamm.200700724
  • Jahn, M.; Panning-von Scheidt, L.; Wallaschek, J. (2019): Parameter on Nonlinear Energy Sink attached to Multiple Degree of Freedom System,  PAMM Proceedings in Applied Mathematics and Mechanics, Vol. 19, No. 1, 2019
    DOI: 10.1002/pamm.201900272
  • Kaptan, K.; Panning‐von Scheidt, L.; Wallaschek, J. (2015): The Vibrational Behavior of Coupled Bladed Disks with Variable Rotational Speed,  Proc. Appl. Math. Mech., 15: 255–256
    DOI: 10.1002/pamm.201510118
  • Laborenz, J.; Siewert, C.; Panning, L.; Wallaschek, J.; Gerber, C. (2009): Mechanical model of a mistuned 2DOF-structure coupled by viscous damping,  Proc. Appl. Math. Mech., 9: 237–238
    DOI: 10.1002/pamm.200910092
  • Panning, L. (2006): Symmetric and Asymmetric Underplatform Dampers for Turbine Blades,  Proc. Appl. Math. Mech., 6: 251–252
    DOI: 10.1002/pamm.200610106
  • Panning, L.; Kröger, M. (2007): Modellierung der Schwingungen beim Werkzeugschleifen,  Proc. Appl. Math. Mech., 7: 4050029–4050030
    DOI: 10.1002/pamm.200700845
  • Panning, L.; Sextro, W.; Popp, K. (2003): Design of Friction Dampers for Mistuned Bladed Disks,  Proc. Appl. Math. Mech. 3, 118–119
    DOI: 10.1002/pamm.200310336
  • Panning, L.; Sextro, W.; Popp, K. (2001): Vibrational Behaviour of Turbine Blade Assemblies with Friction Dampers,  Zeitschrift für angewandte Math. Mech. 81, 207-208, Berlin
  • Pohle, L.; Panning‐von Scheidt, P.; Wallaschek. J. (2015): Harmonic Mistuning of Blisks,  Proc. Appl. Math. Mech., 15: 641-642
    DOI: 10.1002/pamm.201510310
  • Schmidt-Fellner, A.; Siewert, C.; Panning, L. (2006): Experimental Analysis of Shrouded Blades with Friction Contact,  Proc. Appl. Math. Mech., 6: 263–264
    DOI: 10.1002/pamm.200610112
  • Siewert, C.; Panning, L.; Hohl, A.; Bürge, A.; Gerber, C. (2007): Damping of Structural Vibrations using an Electromotive Eddy Current Damper,  Proc. Appl. Math. Mech., 7: 4040039–4040040
    DOI: 10.1002/pamm.200700739
  • Siewert; C., Panning, L.; Popp, K. (2005): The Vibrational Behavior of Bladed Disks in Consideration of Friction Damping and Contact Elasticity,  Proc. Appl. Math. Mech., 5: 131–132
    DOI: 10.1002/pamm.200510046

Patentschriften

  • Hoffmann, T.; Jahn, M.; Panning-von Scheidt, L. (2018): Elektromagnetischer Schwingungsanreger zur Schwingungsanregung der Schaufeln eines Schaufelkranzes,  Patent DE 10 2017 114 153 A1 2018.12.27, Offenlegungsschrift vom 27.12.2018
  • Szwedowicz, J.; Kappis, W.; Panning, L.; Schwarzendahl, S.M.; Neubauer, M.; Hohl, A.; Wallaschek, J. (2011): Verfahren zum Dämpfen von während des Betriebes auftretenden mechanischen Schwingungen in einer Turbomaschinenschaufel, Turbomaschinenschaufel zur Durchführung des Verfahrens sowie piezoelektrisches Dämpfungselement zum Einbau in eine solche Turbomaschinenschaufel,  Europäische Patentanmeldung EP 2 458 150 A1, 04.11.2011

Last Change: 26.09.22 Print

Contact us
Contact